PB-S220A is the Square shape Gold mount battery for cine cameras. It features 150W/12A power outputs and with 4x D-tap DC outputs and one USB 5V/1A port, it is perfectly for powering cine cameras, lights or other devices simultaneously. The built-in LCD screen which displays Remaining power in percentage, remaining running time, lower remaining power alert and battery cycle times
- Square shape design for Cine-cameras
- Capacity: 220Wh, 15.3Ah
- Max 150W, 12A high load
- 4◊ D-tap output sockets
- 1◊ USB 5V/2A power output sockets
- 6A fast charging by charger S-3812A
- LCD display accurate remaining run time
- Display power info in both SONY & RED
- Multiple circuit protections
|Max charging current
|D-TAP socket number
|USB socket number
|Max charging current
High capacity and High load for Cine Cameras
PB-S220A Consists of 24pcs of high class 18650 battery cells, nominal voltage is 14.4V and reaches 220Wh / 15.3Ah high capacity. With 150W/12A continues power drawing, it is suitable for powering cine cameras, lights and other devices.
High Load for Cine Cameras
Max 150W / 12A constant output
Normal Li-ion batteries offer 100W/8A output and suitable for most ENG cameras, but the Cine Cameras such as ALEXA require around 85W high draw which is too heavy for the normal Li-ion batteries: the battery life will be reduced if long time full draw powering. Moreover, if thereíre monitor, wireless system work together, and total power will be above 110W, and the normal batteries cannot draw completely.
Using PB-S220A high-load battery, you can get MAX 150W/12A constant power output, which can drive more high power cameras, LCD Monitor and other equipments easily, and wonít reduce battery life during long time high power output.
Multiple output sockets design
4◊ D-tap output sockets, 1◊ USB 5V/2A power output socket
PB-S220A is equipped with 4 D-tap DC output sockets, which can power other on-camera equipments together. The Max output current of D-tap is 10A, 150W.
PB-S220A is equipped with 1x USB 5V/2A output, which can be used to charge mobile phones, tablets and other portable devices.
6A Fast Charging
Using SWIT S-3812A fast charger
PB-S220A supports 6A fast charging by SWIT S-3812 fast charger, to save more than 50% charging time. The 220Wh PB-S220A battery can be charged from 0 to 80% after 2.3 hours, and fully charged within 3.5 hours.
Digital Power Info
LCD display accurate remaining run time
The build-in LCD can displays remaining power percentage, remaining working time, low power warning, and battery cycle times, and support viewfinder info display on both SONY and RED cameras.
LCD alarm code description
①P01～P13: The battery trigger protection function and it can be recovered;
② When the battery rests over 10 days or runs out of power,it will enter sleep mode and the LCD will not display.
③ E01～E03: Not recoverable error, please contact manufacturers to repair, do not disassemble the battery.
Common battery protection code:
Warranty Period: One years conditional.
View PB-S220A User Manual
||Run out of power, please charge the battery asap.
||Over-voltage when charging, please remove the battery, discharge the battery to decrease the battery voltage to restore.|
||Over-current when charging, please remove the battery, and it will restore after 30 secondsí standing.
||The load is too heavy, please remove the battery, and it will restore after 30 secondsí standing.|
||Battery short circuit, please make sure that there is no foreign body between the electrodes or remove the battery, and it will restore after 30 secondsí standing.
||Temperature protection, please remove the battery and place at room temperature to recover.|
S-3822A 2-ch Gold Mount Battery Charger
S-3812A: 2-channel V-mount Fast Charger
D-3004A 4-channel Digital Gold mount battery Charger