The S-1071F adopts a 7-inch FFS (Fringe field switching) LCD panel, with 1024x600 resolution and LED backlight, 400cd/m2 brightness and 900:1 contrast. The viewing angle is Horizontal: 160° / Vertical: 160°
- 1024×600, 900:1 contrast, H/V 160° angle
- 16:9 display area with 4:3 adjustment
- Underscan / Overscan, safe area
- HD/SD-SDI, HDMI, CVBS input
- Build-in HDMI to SDI conversion output
- Waveform (Y/Cb/Cr/R/G/B), with full scale
- Vector scope, RGB histogram
- Peaking focus assist (red/blue switch)
- Embedded audio meter (SDI 16ch, HDMI 2ch)
- Real time video zoom-in and flip
- SDI timecode display
- False color, Blue only, Zebra stripes, Internal colorbar
- Front and rear 3-color TALLY light
- Customer editable video TITLE
- V-mount / Gold mount / DV mount optional
|Viewing Angle ||H/V: 160°/160°|
||16.77 million color|
||DC 12V/2A or Battery (6.5V- 17V)|
|| 1.3 lb/550g|
S-1071F field monitor supports:
- HD/SD-SDI input x 2
- HD/SD-SDI loop output x 2
- HDMI input x 1
- HDMI loop output x 1
- HDMI input converted to SDI output x 1
- CVBS input x 1
Build-in HDMI to SDI Conversion
The build-in conversion is used to broadcast and deliver the HDMI camera video. It’s same format conversion and supports the following HDMI formats:
480i, 576i, 720p (60 / 59.94 / 50), 1080i (60 / 59.94 / 50), 1080p (30 / 29.97 / 25 / 24 / 23.98)
Video Analysis Assistant Pattern
S-1071F supports Waveforms display under both SDI and HDMI, including Y, Cb, Cr, R, G, B channels, and full scale display of each channel. The Vector scope and R/G/B histogram can be switched on/off independently to the waveforms.
Embedded Audio Monitoring
The monitor displays SDI and HDMI embedded audio level meters, and supports full 16-ch meters under HDSDI input; 2-ch meters under SDSDI and HDMI input. The audio meter is green, and will turn yellow when exceeds -20dB, and turn red when exceeds -9dB. The ch-1 and ch-2 embedded audio can be output via 3.5mm headphone socket.
Under focus assist mode, the in-focused subject will be sketched out by red or blue lines. The focus assist is also available during the image zoom-in.
False color, Blue only, Zebra stripes, Internal colorbar
Safe Area and Scale Marker
You can select the scale of safe area frame from 80%, 85%, 90% and 95% in the menu system. And under HD input, the monitor can display a center 4:3 marker, to help composition the image when using HD recording while SD broadcasting.
3-color TALLY Light
There is front and rear TALLY lights with 3 colors display, and controlled via DB-9 port on the rear panel.
The monitor provides 1/4"-20 screw threads on bottom, left and right side, for installing on camera handle or rigs. By S-7360 dual monitor stand, the 2 S-1071F monitors can be fixed on cranes.
For outdoor using, you can apply a sun hood on the monitor. The sun hood can be easily installed via the left and right screw threads, or directly by Velcro tapes. The sun hood is provided in the monitor package.
Signal Input/ Output:
||2 HD/SD-SDI in
||1 Composite in
||1 HDMI in
||2 HD/SD-SDI loop through out
||1 HDMI converted to SDI output
||1 HDMI loop through output
||SDI and HDMI embedded audio out
||1080I50 /60, 720P50 /60, 1080P24 /25/30
||576i / 480i
||480I /P, 576I /P, 1080I50 /60, 720P50 /60, 1080P24, 1080P25/30/50/60
Battery Mount Options:
|S-1071F monitor has a 4-pin XLR 6.5-17V DC power connector, and also could be powered by different batteries:
*S-7004 series DV battery mount is quick released design and interchangeable with each other.
||Gold Mount Battery|
||Canon DSLR LP-E6|
SWIT S-1071F monitor, carry case, monitor support arm, cold shoe, power adapter, sunhood, screen protection film, HDMI cable with mini-HDMI adaptor, D-tap to 4-pin XLR cable.
Two years conditional.
Monitor Support Arm
AC Power Adapter
View S-1071F User Manual